Basic Info.
Model NO.
80YS25WGV22+80GK100H
Certification
ISO9001, CCC
Stand Code
60, 70, 80, 90, 100mm
Motor Shaft
Gear Shaft, Round Shaft
Capacity
6/15/25/40/60/90/120/140/200W
All Technical Data
Can Be Customized
Dimensions of Device
60mm
Cetificates
Ce ISO9001 CQC Iaf Tx CCC CNAS
Transport Package
CTN/Wooden Box
Product Description
80*80 mm 25W AC Gear Motor (Ratio 3-200)
Parameters| Micro AC Motor(80*80mm) |
| Model | Max.
Output Power | Voltage
(V) | Frequency
(Hz) | Current
(A) | Speed Range
(r/min) | Start Torque
(mN.m) | Rate Torque
(mN.m) | Running Capacitor |
1200
r/min | 900
r/min |
| 80YS25WG(D)V11 | 25w | Single Phase 110v | 50Hz | 0.53 | 90-1300 | 145 | 170 | 45 | 8μf/250V |
| 60Hz | 0.48 | 90-1600 | 120 | 170 | 45 |
| 80YS25WG(D)V22 | 25w | Single Phase 220v | 50Hz | 0.25 | 90-1300 | 145 | 205 | 50 | 2μf/450V |
| 60Hz | 0.23 | 90-1600 | 120 | 205 | 50 |
| 80YS25WG(D)Y22 | 25w | Three Phase 220v | 50Hz | 0.25 | 90-1300 | 195 | 195 | | |
| 60Hz | 0.23 | 90-1600 | 160 | 160 | |
| 80YS25WG(D)Y38 | 25w | Three Phase 380v | 50Hz | 0.14 | 90-1300 | 195 | 195 | | |
| 60Hz | 0.13 | 90-1600 | 160 | 160 | |
Remark:
(1) The optimal speed range of the motor: 400-1300r/min(50Hz),400-1600r/min(60Hz).
(2) When the power is cutt off,the motor will stop immediately and hold the load. |
| Model | Picture | Reduction Ratio |
Standard Gearbox
80GK_H | | 1:3-200 |
Right Angle Hollow Gearbox
L80GK_RC | |
Right Angle Solid Gearbox
L80GK_RT | |
Intermediate Gearbox
80GM10 | | 1:10 |
Remark:
(1) The average motor speed 50Hz is 1300 r/min,60Hz is 1600r/min;
(2) The actual speed changes according to the load(±8%). |
| Mirco AC Motor Model |
| |
| 1 | Stand Code | 60, 70, 80, 90, 100 |
| 2 | Power Code | 06W, 15W, 25W, 40W, 60W, 90W, 120W, 140W, 200W |
| 3 | Name Code | YS: Standard Motor |
| YT:Variable Speed Motor |
| YB: Electromagnetic Brake Motor |
| YF: Variable Speed Electromagnetic Brake Motor |
| YR: Damping Motor |
| 4 | Motor shaft from code | G: Gear shaft |
| D: Round shaft |
| 5 | Voltage Code | V11 Single Phase 110V |
| V22 Single Phase 220V |
| Y22 Three Phase 220V |
| Y38 Three Phase 380V |
| 6 | Derived Code | X: Lead(Line length 300mm) |
| T: With thermal protector |
| H: With terminal block |
| Gearbox Model |
| |
| 1 | Stand Code | 60, 70, 80, 90, 100, L80, L90, L100 |
| 2 | Model Code | GK:6-25W |
| GF:40-200W |
| 3 | Reduction Ratio | 3, 3.6, .....200 |
| 4 | Structure Code | H: Standard |
| HE: Eared |
| RT: Right Angle Solid |
| RC: Right Angle Hollow |
| 5 | Derived Code | K: Hole |
- Wide gear ratio range of options, ranging from 3-1800;
- Low energy consumption, superior performance, speed reducer efficiency up to 90%, small vibration, low noise(lower than 65decibel);
- High versatility and Maintenance-free, low cost;
- Good sealing performance, good protection performance, high adaptability to the environment, can be continuous working in corrosive, humidity and other harsh environment.
Packing, Payment & Shippment Payment
| (1) T/T, West Union, L/C.
(2) Mass production: 30% deposit in advance, 70% balance before delivery. |
| Packing | Carton, Pallets / Wooden case, according customers' requirement. |
| Shipment | (1) Sample order lead time is in 5 days.
(2) Mass quantity order lead time is 7-15 days.
(3) Sample will be shipped out within 1-5 working days by international express company like DHL, FedEx, UPS, EMS. Mass Cargo will be shipped out by sea. We will choose the best and suitable shipping way. |
Q: What should I provide when I choose gearbox/speed reducer?
A: The best way is to provide the motor drawing with parameter. Our engineer will check and recommend the most suitable gearbox model for your refer.
Or you can also provide below specification as well:
1) Type, model and torque.
2) Ratio or output speed
3) Working condition and connection method
4) Quality and installed machine name
5) Input mode and input speed
6) Motor brand model or flange and motor shaft size
Q: How long does it take to finish my order?
A: Normally your order could be delivery in 7-15 days, some hot sales products could be fast delivered in 1 week. It depends on the quantity.
Q: Can I get a sample first?
A: Sure, we are honored to offer you sample for test before placing a formal order.
Q: Where is the port of shipment?
A: Shanghai or Shenzhen.
Q: How does your factory do regarding quality control?
A: Quality is priority. We always attach great importance to quality control from the beginning to the end of the production. Every product will be fully assembled and carefully tested before packed.
Q: What's your warranty terms?
A:Warranty: 1 year after the shipping date against B/L.
Company Introduction
Wanshsin Seikou (Hunan) Co.,Ltd. was established in 2009, moved to Changsha Ningxiang in 2014,which occupied 70000 square meter, with more than 500 workers. The original headquarters Wanxin Machinery Co., Ltd. in Dongguan is a subsidiary fully responsible for the production of micro and medium-geared motor, the Hunan facotry became to our Group headquarters now,and has two wholly-owned subsidiaries: Dongguan Wanshsin Electromechanical and Wanshsin India Private Limited. Existing assets exceeding 100 million yuan, of which investment in fixed assets of nearly 60 million yuan equipment. It has a full range of functions supporting the international advanced level of various types of processing, testing equipment, more than 50sets such as: KASHIFUJI hobbing KN80, Japan HAMAI secondary axis four linkage CNC hobbing knife N60, NC worm wheel grinding machine, milling center machine, the US Hardinge, Japan coordinate measuring machines, gear measuring center, Oriental heat treatment lines, and our imported equipment are more then 80% for all.
Address:
No. 158, Jinsha East Road, Jinzhou New District, Ningxiang County, Changsha, Hunan, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Industrial Equipment & Components, Manufacturing & Processing Machinery
Management System Certification:
ISO 9001
Company Introduction:
Wanshsin Seikou (Hunan) Co., Ltd. Was established in 2009, moved to Changsha Ningxiang in 2014. The original headquarters Wanxin Machinery Co., Ltd. In Dongguan is a subsidiary fully responsible for the production of micro and medium-geared motor, the Hunan facotry became to our Group headquarters now, and has two wholly-owned subsidiaries: Dongguan Wanshsin Electromechanical and Wanshsin Shandong Office(Assembly). Existing assets exceeding 100 million yuan, of which investment in fixed assets of nearly 60 million yuan equipment. It has a full range of functions supporting the international advanced level of various types of processing, testing equipment, more than 50sets such as: KASHIFUJI hobbing KN80, Japan HAMAI secondary axis four linkage CNC hobbing knife N60, NC worm wheel grinding machine, milling center machine, the US Hardinge, Japan coordinate measuring machines, gear measuring center, Oriental heat treatment lines, and our imported equipment are more then 80% for all.
){kind=link}